Depuis 1988 ASINFO intègre des serveurs industriels et solutions serveurs à valeur ajoutées...
R271-Z00 GIGABYTE
Serveur Gigabyte R271-Z00 (rev.100) AMD EPYC UP Server System - 2U 14-Bay
- AMD EPYC™ 7001 series processor family
- 8-Channel RDIMM/LRDIMM DDR4, 8 x DIMMs
- 2 x 1Gb/s LAN ports (Intel® I210-AT)
- 1 x Dedicated management port
- 12 x 3.5" and 2 x 2.5" SATAIII hot-swappable HDD/SSD bays
- Ultra-Fast M.2 with PCIe Gen3 x4 interface
- 5 x low profile PCIe Gen3 expansion slots
- Aspeed® AST2500 remote management controller
- 550W 80 PLUS Platinum redundant PSU
OFFRE OPTIMISÉE: Demandez votre devis gratuit
LIVRAISON RAPIDE: 2H/ Paris 24H/ FRANCE 
Demandez Conseil à notre équipe avant vente au 0148101120 ou par email au sales@asinfo.com
Dimensions (WxHxD, mm)
2U
430 x 87 x 710 mm
430 x 87 x 710 mm
Motherboard
CPU
AMD EPYC™ 7001 series processor family
Single processor, 14nm, Socket SP3
Up to 32-core, 64 threads
TDP up to 200W
Single processor, 14nm, Socket SP3
Up to 32-core, 64 threads
TDP up to 200W
Chipset
System on Chip
Memory
8 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: 2666/2400/2133 MHz
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: 2666/2400/2133 MHz
LAN
2 x 1Gb/s LAN ports (Intel® I210-AT)
1 x 10/100/1000 management LAN
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
Audio
-
Storage
Front side: 12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
2.5" HDD/SSD supported
Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Front side default configuration supports:
12 x SATA drives
or
4 x SATA drives
8 x SAS drives
SAS card is required for SAS devices support
2.5" HDD/SSD supported
Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Front side default configuration supports:
12 x SATA drives
or
4 x SATA drives
8 x SAS drives
SAS card is required for SAS devices support
RAID
-
Peripheral Drives
-
Expansion Slots
Total 5 x low profile PCIe Gen3 expansion slots
- Slot_7 (PCIe_7): 1 x PCIe x16 (Gen3 x16 bus)
- Slot_5 (PCIe_5): 1 x PCIe x16 (Gen3 x16 bus)
- Slot_4 (PCIe_4): 1 x PCIe x8 (Gen3 x8 bus)
- Slot_3 (PCIe_3): 1 x PCIe x16 (Gen3 x16 bus)
- Slot_1 (PCIe_1): 1 x PCIe x16 (Gen3 x16 bus)
1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
- Slot_7 (PCIe_7): 1 x PCIe x16 (Gen3 x16 bus)
- Slot_5 (PCIe_5): 1 x PCIe x16 (Gen3 x16 bus)
- Slot_4 (PCIe_4): 1 x PCIe x8 (Gen3 x8 bus)
- Slot_3 (PCIe_3): 1 x PCIe x16 (Gen3 x16 bus)
- Slot_1 (PCIe_1): 1 x PCIe x16 (Gen3 x16 bus)
1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
Internal I/O
1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
4 x SlimSAS connectors
1 x M.2 slot
1 x CPU fan headers
6 x System fan headers
1 x USB 3.0 header
2 x COM headers
1 x TPM header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
2 x 8-pin ATX 12V power connectors
4 x SlimSAS connectors
1 x M.2 slot
1 x CPU fan headers
6 x System fan headers
1 x USB 3.0 header
2 x COM headers
1 x TPM header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD activity LED
2 x LAN activity LEDs
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD activity LED
2 x LAN activity LEDs
Rear I/O
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x ID switch with LED
1 x Power switch with LED
1 x VGA
2 x RJ45
1 x MLAN
1 x ID switch with LED
1 x Power switch with LED
Backplane I/O
Backplane P/N: 9CBP20C3NR-00
Speed and bandwidth:
SAS 12Gb/s, SATA 6Gb/s
Speed and bandwidth:
SAS 12Gb/s, SATA 6Gb/s
TPM
1 x TPM header with LPC interface
Optional TPM2.0 kit: CTM000
Optional TPM2.0 kit: CTM000
Power Supply
2 x 550W redundant PSUs
80 PLUS Platinum
AC input:
- 100-240V, 50-60Hz, 8-4A
DC input:
- 240Vdc, 2.75A
DC output:
- 550W
- +12V/44A
- +12Vsb/2.1A
80 PLUS Platinum
AC input:
- 100-240V, 50-60Hz, 8-4A
DC input:
- 240Vdc, 2.75A
DC output:
- 550W
- +12V/44A
- +12Vsb/2.1A
System Management
R271-Z00
Besondere Bestellnummern
8 andere Artikel in der gleichen Kategorie:
Serveur Gigabyte R271-Z00 (rev.100) AMD EPYC UP Server System - 2U 14-Bay
- AMD EPYC™ 7001 series processor family
- 8-Channel RDIMM/LRDIMM DDR4, 8 x DIMMs
- 2 x 1Gb/s LAN ports (Intel® I210-AT)
- 1 x Dedicated management port
- 12 x 3.5" and 2 x 2.5" SATAIII hot-swappable HDD/SSD bays
- Ultra-Fast M.2 with PCIe Gen3 x4 interface
- 5 x low profile PCIe Gen3 expansion slots
- Aspeed® AST2500 remote management controller
- 550W 80 PLUS Platinum redundant PSU