Veuillez nous laisser un message
Depuis 1988 ASINFO intègre des serveurs industriels et solutions serveurs à valeur ajoutées...
System | Form Factor | 2U Rackmount |
Chassis Model | TN83 | |
Dimension (D x W x H) | 32.71" x 17.25" x 3.43" (831 x 438.4 x 87mm) | |
Motherboard Name | S8251GM2NE-2T # | |
Motherboard Notification | # The motherboard not sold separately | |
Gross Weight | 33.1 kg (73 lbs) | |
Net weight | 20.3 kg (44.8 lbs) | |
Front Panel | Buttons | (1) UID / (1) PWR w/ LED / (1) RST |
LEDs | (1) HDD / (1) UID / (2) LAN / (1) System Event | |
I/O Ports | (2) USB 3.1 Gen.1 ports | |
External Drive Bay | Q'ty / Type | (8) 3.5" Hot-swap HDD/SSDs |
Front Drive Bay Interface | (8) SATA 6Gb/s / NVMe | |
Front HDD Backplane Support | SAS 12Gb/s /SATA 6Gb/s /NVMe | |
Notification | The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact Tyan technical support if a discrete SAS HBA/RAID adapter is required. | |
System Cooling Configuration | FAN | (5) 8cm fans |
Power Supply | Type | CRPS |
Input Range | AC 200-240V/12.6A | |
Frequency | 47-63 Hz | |
Output Watts | 2,200 Watts | |
Efficiency | PFC / 80 plus Platinum | |
Redundancy | 1+1 | |
Processor | Q'ty / Socket Type | (2) AMD Socket SP3 |
Supported CPU Series | (2) AMD EPYC™ 7002/7003 Series Processors | |
Thermal Design Power Wattage | Max up to 240W* (cTDP) | |
#Notification | 240W CPUs are supported with certain condition. Please contact Tyan Technical Support before purchasing | |
Memory | Supported DIMM Qty | (8)+(8) DIMM slots |
DIMM Type / Speed | DDR4 ECC RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 3200 | |
Capacity | Up to 2,048GB RDIMM / 4,096GB LRDIMM 3DS | |
Memory channel | 8 Channels per CPU | |
Memory voltage | 1.2V | |
Expansion Slots | Pre-installed TYAN Riser Card (PCIe Gen.4) | (1) M8251T83-L32-2F riser card for (2) FH/FL PCIe Gen.4 x16 / (1) M8251T83-R32-2F riser card for (2) FH/FL PCIe Gen.4 x16 / (1) M8251T83-LR32-2L riser card for (1) HH/HL PCIe Gen.4 x16 (right) +(1) HH/HL PCIe Gen.4 x16 (left) slots |
Physical Dimension Abbreviation | FH/FL (Full-height / Full-length): 4.4" x 12.3" (111.2 x 312mm) | |
LAN | Q'ty / Port | (2) 10GbE ports + (1) GbE dedicated for IPMI |
Controller | Intel X550-AT2 | |
PHY | Realtek RTL8211E | |
Storage SATA | Connector | (8) SATA from (2) Slim SAS (8 ports) / (2) SATA-DOM |
Controller | Direct from AMD EPYC CPU | |
Speed | 6Gb/s | |
RAID | N/A | |
Storage NVMe | Connector (U.2) | (4) SFF-8654 for (8) front NVMe |
Graphic | Connector type | D-Sub 15-pin |
Resolution | Up to 1920x1200 | |
Chipset | Aspeed AST2500 | |
I/O Ports | USB | (1) USB3.1 Gen.1 port (Type-A) / (2) USB3.1 Gen.1 ports (via Cable) / (2) USB3.1 Gen.1 ports (@ rear) |
COM | (1) header ( COM1 ) | |
VGA | (1) D-Sub 15-pin port | |
RJ-45 | (2) 10 GbE ports + (1) dedicated GbE for IPMI | |
SATA | (2) SATA-DOM connectors / (8) SATA from (2) Slim SAS connectors | |
TPM (Optional) | TPM Support | Please refer to our TPM supported list. |
System Monitoring | Chipset | Aspeed AST2500 |
Temperature | Monitors temperature for CPU & memory & system environment | |
Voltage | Monitors voltage for CPU, memory, chipset & power supply | |
LED | Over temperature warning indicator / Fan & PSU fail LED indicator | |
Others | Watchdog timer support | |
Server Management | Onboard Chipset | Onboard Aspeed AST2500 |
AST2500 iKVM Feature | 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub | |
AST2500 IPMI Feature | IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface | |
BIOS | Brand / ROM size | AMI / 32MB |
Feature | Hardware Monitor / FAN speed control automatic / Boot from USB device/PXE via LAN/Storage / Console Redirection / SMBIOS 3.0/PnP/Wake on LAN / ACPI 6.1 / ACPI sleeping states S0, S5 | |
Operating System | OS supported list | Please refer to our AVL support lists. |
Regulation | FCC (SDoC) | Class A |
CE (DoC) | Class A | |
CB/LVD | Yes | |
RCM | Class A | |
VCCI | Class A | |
Operating Environment | Operating Temp. | 10° C ~ 35° C (50° F~ 95° F) |
Non-operating Temp. | - 40° C ~ 70° C (-40° F ~ 158° F) | |
In/Non-operating Humidity 90 | 90%, non-condensing at 35° C | |
Package Contains | Barebone | (1) TN83-B8251 Barebone |
Manual | (1) Quick Installation Guide | |
RoHS | RoHS 6/6 Compliant | Yes |